Recently, there was a question on the internet about why a water filter always has one grid of water. Some customers may not understand the working principle of a water filter and search for answers on the internet, which has caused some misunderstandings about the one grid of water in a water filter. So, in response to this issue, Liang, the technical staff of the filter in the middle, will explain to us in detail why the display screen of the water heater will display one grid of water, and why.

Firstly, the water heater adopts a step-by-step heating principle, heating layer by layer. When the water level in the water heater reaches a low level, the machine will stop feeding water and start heating the amount of water. At this time, the display screen of the water heater will show that the water level line is one grid, and the temperature displayed on the display screen is 100 ℃. Moreover, during this process, the water heater will continue to heat the inlet water until the machine reaches a high water level before stopping the inlet water. At this time, the water level indicator on the display screen is full.

However, in practical use, many users are not familiar with the operating principle of the water dispenser. When the water level line on the display screen of the water dispenser is one grid and the display temperature is 100 ℃, they start to directly discharge water. The faucet is in an open state, and the amount of water entering will be directly discharged from the faucet, resulting in the display screen always displaying as one grid of water, and the machine is always in operation.

Simply put, it appears as a grid of water when the water heater is not fully filled and boiling. After waiting for it to continue to be filled and boiling, it becomes a grid of water. This is the working principle of the water heater, not a product issue, and we can use it with confidence.

文章源自：开平开水器龙头        http://www.kplongyi.com/